Lining the OSR panel and fitting

So time to put the lining on the OSR panel.  A first-time for me since the guys who fitted the roof & windows did the rest.

These are the “invisible” clips I used for the top LHS fixings.

I used spray adhesive (from Kiravans) and applied it to both sides then wait a short time.

Then I carefully applied it (a two person job), putting the lining on top of the ply.  I folded the edges over then when the adhesive was set I carefully trimmed the lining back to the edge.

I had to glue some extra bits of ply to enable the back box to fit correctly.

Now ready to fit.

Leave a Reply

Your email address will not be published. Required fields are marked *