Now I have the exact location of the seat it’s time to consider the fit of other items and also what additional holes I need to drill through the floor.
This is the view from the rear, under the centre section of the Rib seat. I’m planning to locate the leisure battery, chargerand mains consumer unit under hear whislt leaving space for the toilet at the front.
This is the battery mount I purchased on eBay (I don’t want such a heavy item moving at all in a crash!). Also you can see the hole I have drilled to access the negative connection for the battery I have made.
I drilled a hole through the floor then removed all of the paint from both sides around the hole, fitted a long bolt with large washers on both sites to ensure I get a good electrical connection. The second hole is for the conduit I will use for the mains cable from the underbody mounted socket.
View from underneath.
This shows a couple of holes in the unit to the right of the sink. The larger one is for the gas drop-vent and the other for the gas pipe to the Propex heater.
Next I needed to ensure that the mounts for the LPG tank would be secure. Unfortunatley the location of the brackets meant that I had to modify some of the wooden spacers I’d installed.
One of the brackets I made (I had to cut a section out to avoid one of the battery tray mount holes).
Brackets in place.
All the holes made in the Altro flooring. Notice the ridges in the flooring, my fault for having it rolled up for too long. Luckily I managed to get rid of them by leaving it rolled out for a while.